GAS HOG

SOUND HOG

FLUIDATOR

COOLER

The Fluidator - A Pump Like No Other

THE CONCEPT

The Fluidator is a hydraulically driven, positive displacement liquid pump specifically developed by GFI with a unique design incorporating many features that make it stand out in today's marketplace. The basic operating principles and design are simple: the proven and tested design concept for the Gas Hog booster compressor was adapted and applied to a liquid pump. This resulted in a slow moving, single stage, double acting piston pump.

THE OPERATION

The pump and hydraulic pistons are designed to move in a reciprocating fashion, allowing the Fluidator to both draw in and discharge simulataneously. A directional switching mechanism allows the hydraulic drive cylinder to reciprocate, while the inlet scrubber float valve triggers and electric switch to start the pump. The liquid is then pumped into the high pressure natural gas discharge line or into another storage tank.

THE PERFORMANCE

The Fluidator is capable of moving up to 25 GPM, (90 LPM) or liquid at pressures up to 250 psi, (1724 kPa). Lower volumes can be obtained by adjusting the hydraulic speed control. Its rugged, simplistic design allows for long life, low maintenance and reliability. The Fluidator easily moves water, oil, condensate or any combination with sand or other solid materials.

THE FEATURES

A single component, hydraulic switching block incorporates speed control, pressure adjustment and actuation of the pump. The hydraulic and fluid end cylinders are mounted on a single rod contained in a sealed housing. This eliminates any possibility of external liquid leaks due to seal failure. An inspection port located between the cylinders allows the operator to periodically lubricate and inspect for seal leaks.